Fire Retardant Plywood IS:5509

Price And Quantity

Unit of Price
Piece/Pieces
Minimum Order Quantity 7000

Unit of Measure Piece/Pieces,
Price
1INR

Price Range
98.00-

Product Specifications

Usage Furniture
Size Customized as per Oreder

Plywood Type other
Thickness 12 to 75 Millimeter (mm)

Product Description

STONIC is a excellent Fire Retardant Plywood IS:5509 with extremely good resistance capacity from fire. This special grade is treated with proven fire retardant chemicals at the time of manufacture and completely composed with high density hard wood veneers. With boiling water proof marine grade quality standards, STONIC FRP is uniquely processed for creating a super resistance from fire.

STONIC FRP is manufactured as per IS:5509 specifications that ensures the flammability test, rate of burning and flames to penetrate in plywood as per the Bureau of Indian Standards.

STONIC FRP is advisable to be used in public places, where the risk of fire has to be reduced. The areas such as in kitchen woodwork of large restaurants, interior woodwork public auditoriums, theatres and banquet halls. STONIC FRP is very suitable for every application in premium homes and villas as it confirms to all requisites of IS 710 and IS 5509. It can be used in railway compartments of railway trains or other public transport or station facilities. STONIC FRP is the most suitable plywood panel for high rise commercial buildings as this will prevent the occupants from fire and fumes for an extended period of time to provide enough escape time.

STONIC FRP is the best product for any interior wood working, specially at such places where the risk and spread of fire has to be reduced.

STONIC FRP resists Spark and Ignite without any penetration. It offers 30 % lesser smoke generation with extended flame penetration time. It offers very Slow burning, having a decreased tendency of the fire to spread over the surface of the plywood.

USES : Ships, Bus coaches, Cinema Halls, High rise buildings, Restaurants, Railway Coaches, Vehicle Bodies in Boiler House, Kitchen, Inner Roof Wall Linings, Exhibition Stalls, Public places, Offices, Homes etc

Available Dimensions :

Standard thickness : 6mm, 9mm, 12mm, 16mm, 19mm, 25mm

Standard Size : 2440 x 1220 mm.

Customize sizes are also available as per customers requirement.

Properties :

S. NO.	TEST DESCRIPTION	SPECIFIED REQUIREMENT	OBSERVATION
Dimensional Requirement
1.	Length Width Thickness Squareness Edge Straightness	( + ) 6 mm., ( - ) 0 mm. ( + ) 3 mm., ( - ) 0 mm. < 6 mm + 10 %, 6 mm + 5 % 0.2 % 0.2 %	With in tolerance limits
Physical Parameters
2.	Glue shear Strength (In Dry State) Average Minimum Individual Adhesion of plies (knife test)	1350 1100 Shall be min. pass standard	1630 1540 Excellent
3.	Water Resistance Test Average Minimum Individual Adhesion of plies (knife test)	1000 800 Shall be min. pass standard	1440 1250 Excellent
4.	Tensile Strength (In N/mm2) Parallel to the face grains Perpendicular to the face grains Sum of Tensile Strength (1+2)	42 25 84.5	54 44 98
5.	Static Bending Strength Across (Direction perpendicular to the grain direction of face veneer) Modulus of Elasticity (MOE) in N/mm2 Average Minimum Individual Modulus of Rupture (MOR) in N/mm2 Average Minimum Individual	4000 3600 30 27	4870 4350 34 32
Fire Retardant Requirement as per IS 5509:2000
6.	Flammability	Time taken for the second ignition shall not less than 30 min.	65 min.
7.	Flame penetration	15/6 x thickness min.	55 min for 12 mm thickness
8.	Rate of Burning	Not less than 20 min.	40 min minimum
Burning Rate Test as per IS 15061:2002
9.	Horizontal Burning Rate, mm/minute (Along the grain direction of the face veneer) as per IS 15061:2002, Annexure A, Clause 3.2	The result of the test shall be satisfactory if, taking the worst test results into account, the horizontal burning rate is not more than 100 mm/minute or if the flame extinguishes before reaching the last measuring point.	The flame extinguishes before reaching the last measuring point. The material meets horizontal (Along) flammability requirements.
10.	Horizontal Burning Rate, mm/minute (Across the grain direction of the face veneer) as per IS 15061:2002, Annexure A, Clause 3.2	The result of the test shall be satisfactory if, taking the worst test results into account, the horizontal burning rate is not more than 100 mm/minute or if the flame extinguishes before reaching the last measuring point.	The flame extinguishes before reaching the last measuring point. The material meets horizontal (Across) flammability requirements.

Trade Information

Payment Terms Cheque, Cash in Advance (CID)
Supply Ability 1000 Per Month

Delivery Time 10-15 Days
Main Domestic Market All India